장착방법 - 브롬톤 프론트 브레이크용 너트를 분해후 페달홀더를 끼우고 다시 조입니다. - 9미리/10미리 육각렌치를 사용하게되면 손에 느껴지는 것보다 큰 토크로 체결되므로 너무 세게 조이지 않도록 주의해 주세요. (적정토크 8Nm) * 9미리 홀더를 장착하기 위한 9미리 육각렌치는 일반적인 규격이 아니므로 공구가 없으면 같이 주문해 주세요. 상품설명 - 착탈스핀들 직경 9미리, 10미리 제품을 선택해 주세요. (MKS사의 Superier Ezy 방식의 스핀들이 9미리이며 나머지는 대부분 10미리입니다.) - 내부에 자석이 삽입되어 있어 페달이 떨어지지 않으며 티타늄 스핀들은 충분 깊이만큼 들어가서 안정적이지만 거치만 됩니다. - 페달홀더는 9미리, 10미리 육각렌치를 이용해서 장착며 육각렌치는 별도로 구매 가능합니다. - 더스트캡은 손으로 꽉 눌러서 내부의 공기가 빠지도록 장착해 줍니다. - 구형 브레이크가 설치되어있는 2018년식 이전 브롬톤에는 사용 할 수 없습니다.
Installation - Remove Brompton front brake nut and assemble with pedal holder and tighten again. - If you use a 9mm/10mm hex wrench, be careful over-torque it as it tightens with a higher torque than you can feel in your hand. (Recommended torque is 8Nm) * The 9mm hex wrench for installing 9mm holder is not a normal size, so if you do not have a tool, please order it together.
Features - Please choose 9mm or 10mm according to your spindle diameter.(MKS's Superier Ezy type spindle is 9mm, and most others are 10mm.) - A magnet is inserted inside to prevent the pedal from falling off, and the titanium spindle is inserted sufficiently deep to make it stable but can only be mounted. - The pedal holder is tightened using 9mm or 10mm hex wrench, which can be purchased together. - Press the dust cap tightly with your hand to remove the air inside. - It cannot be applied to Bromptons before 2018 that have older brakes.
Product Details
Product
[Brombacher] Magnetic Pedal holder on the fork for Brompton A/C/P Line (9mm/10mm)
Manufacturer
Brombacher
Price
$29.00
Shipping (Charge)
International Shipping Fee
수량
Payment
Shipping
Shipping Method : Parcel Service
Shipping Area : A Region.
Shipping Cost : International Shipping Fee
Shipping Time : 7 - 14 days
About Shipping :
Returns/Exchanges
Refunds
It takes 3-5 business days to issue a refund for a returned or cancelled order. Please be advised that your refund may not be processed until the next billing month depending on your credit card issuer's billing schedule.